|
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
|
- Aluminum Horse Stall Doors &
Grill Units -
FREE SHIPPING to the nearest
freight terminal or commercial business address in the Continental
U.S. 48 States * No Miminum Order Required for Products on this
Page.
Toll Free: 1-800-335-1880
Office Hours Monday-Friday 7:00 am - 5:00 pm EST.
Aluminum Stall Doors & Grill
Units The Same Appearance for Years! Strong and attractive anodized
(hard protective coating) aluminum horse stalls provide the ultimate
in luxury, style, and corrosion prevention. NO-WELD CONSTRUCTION!
 |
The 4 ft. wide grill sections feature 1 inch
diameter tubes inserted on 4 inch centers (3" opening).
The 29 inch tube height allows for 10 each 2 x 6 boards below
the grill work. The top and bottom grill channels are designed
to fit over standard 2 inch (1 1/2 inch thick) construction lumber.
The door frame uses the same grill, but also includes two vertical
side channels that attach to ten lower boards and one board above
the grill.
When assembled, the door unit becomes very sturdy.
A sliding door kit is also available.
The kit includes an 8' galvanized track, two hangers with nylon
rollers, complete door latch assembly, and a bottom stay roller.
(Everything you need to hang the door). |
Makes your Barn Shine
 |
• Maintenance Free Horse Stalls
• Luxurious
• Versatile
Using the 4 ft. sections, any size horse stalls can be built
(8 ft.,10 ft., 12 ft).
Also, odd sizes can easily be cut with a standard hacksaw.
Example: a 12 ft. horse stall front would require 2 each 4 ft.
sections
and 1 each 4 x 7 door frame.
Removable side stall walls can be made using our 7 ft. long wall
channel designed to accept standard 2 inch lumber (1 1/2 inch
thick). Great For Foaling Stalls. |
|
1. Typical Requirements for 12' Stall Front |
2. Typical Requirements for 10' Stall Front |
3. Stall Side or Back Wall Partitions |
| 1 ea CM 22 Standard Grill |
Same as 12 ft. except cut 1 ea CM 22 to
2 ft. |
2 ea CM 24 Wall Channels for each partition. |
| 1 ea CM 23 Grill with Opening or CM 22
Standard Grill |
|
Use CM 22 for ventilated partitions. |
| 1 ea CM 20 Door Frame Assembly |
|
(Use 3 Units for 12' Wall). |
| 1 ea CM 84 Door Hardware Kit |
|
|
Note:
All channels are designed to accept standard 2" lumber
(1 1/2" thick). NO LUMBER IS INCLUDED.
Click
Here to View Basic Stall Building Guide
 |
Horse Stall Door (4 ft. x 7 ft.) CM 20 (anodized aluminum
framework only, lumber not included) 4 ft. wide grill is 29"
high x 1" round tubes inserted, on 4" centers, into
channels top & bottom. Tubes free-float in the channels for
easy replacement and our no-weld construction provides superior
corrosion resistance. (door latch and top brackets not included,
see sliding door hardware kit below)
Color- Aluminum
$255.00 Click
here to Order On-line or Call 1-800-335-1880
This item can ship to your residence
FREE!
|
 |
Stall Grill (4 ft. Section) CM 22. 4 ft. wide grill
is 29" high x 1" round tubes inserted, on 4" centers,
into channels top & bottom. Tubes free-float in the channels
for easy replacement and our no-weld construction provides superior
corrosion resistance.
Color- Aluminum
$165.00 Click
here to Order On-line or Call 1-800-335-1880
This item can ship to your residence
FREE!
|
 |
Stall Grill w/Hinged Section CM 22H. 4 ft grill section
with a swing-out section allows you to create a gossip door or
a swing-out feed door. Tubes free-float on the assembly for easy
replacement and our no-weld construction provides superior corrosion
resistance. Just attach the brackets to your lumber top and bottom.
Spring loaded latch locks swing section in place open or closed.
Color- Aluminum
$245.00 Click
here to Order On-line or Call 1-800-335-1880
This item can ship to your residence
FREE!
|
 |
Stall Grill w/Feed Opening CM 23. 4 ft. wide grill
is 29" high x 1" round tubes inserted, on 4" centers,
into channels top & bottom. Tubes free-float in the channels
for easy replacement and our no-weld construction provides superior
corrosion resistance. This grill has a feed opening measuring
10 inches x 10 inches.
Color- Aluminum
$165.00 Click
here to Order On-line or Call 1-800-335-1880
This item can ship to your residence
FREE!
|
 |
7 ft. long wall channel CM24. Removable side stall walls
can be made using our 7 ft. long wall channel designed to accept
standard 2 inch lumber (1 1/2 inch thick). Attach the wall channels
to your support posts or walls and slide the lumber into the
channels. Measures 7 ft. long x 1 3/4" wide x 2 3/4"
deep.
Color- Aluminum
$35.00 Click
here to Order On-line or Call 1-800-335-1880
This item can ship to your residence
FREE!
|
 |
Horse Stall Sliding Door Hardware Kit CM 84. Consists
of door brackets, door latch, bottom stay roller assembly, polyethylene
roller system for long life and 8 ft section of enclosed-top
track to keep dust and material from falling into the rollers
and jamming your door. (for aluminum stall doors, the bottom
stay roller is hidden in the bottom door track)
All mounting hardware included.
$150.00 Click
here to Order On-line or Call 1-800-335-1880
This item can ship to your residence
FREE!
|
Other stall accessories available in our feeder
and waterer sections.
|
